CIP SELF-PRIMING PUMP
1. Application
The pump is mainly used to deal with the convey of gas-bearing materials. So it is Widely used in the occassions that the liquid level is instable, and the liquid level is lower than thatOf inlet to draw the material, and also used as reture in the CIP system. And it is the necessaryConvey equipment in the food, chemical, pharmacy. Field.
2. Functions and specifications
The design adopt the side channel principle leading to the excellent suction, sanitariality, low Power, lower noise, easy to clean, and low cost to maintanance. Shaft sealing YUY sanitary priming pump seal is mechanical seal, include the stationary ring SUS316L steelEmbedded in grapgite structure, and the movable ring made of silicon carbide.
3. Material
All the part contact with medium, pump case. Pump cover and impeller are made of AISI316L stainless Steel.
The part contact with medium: AISI316L stainless steel
Other parts: AISI304 stainless steel
The sealing contact with medium: EPDM
UnRegisteredSurface treatment
The part contact with medium is polished, and other part is glass painted or sand
Blasted treatment.
Datasheet
Max Inlet Pressure: 0.5Mpa
Temperature Range: -10° C to +140° C(EPDM)
Flushed mechanical seal:
Water pressure: Max0.1MPa
Water consumption: 0.25-0.5L/min
4. Motor
I)According to the configuration, we adapt three phase"ABB"brand AC motor. The motor desiged According to the International Eltronical Commission IEC 60034. IEC60072, and comply with the EC requirements of "CE"marking requirement.
II). The explosion-proof motor also available, that can meet with the requirement of different Applications.
III)It with excellent electric performance, and with low niose, low vibration, the protection grade is IP55, insulation grade is F.
IV) The operate involtage ≤ 3Kw, 220-240V/380-420V, /Y
>3Kw, 380-420V/660-690V, /Y
V)Frequency
50Hz/60Hz
VI)Operate way: Continously
VII)Running Speed: 1450r/min
Flow Q 3-100M3/H
Total lift H: 15-28M
Suction lift: 5M
Inlet/outlet pipe diameter: 51mm-76mm
Material: 304, 316L
Power: 1.5kw, 4kw, 5.5kw, 7.5kw
5. Features
CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in valve body, which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement pump, its features are superior to centrifugal pump since it suction liquid mixed with air or foams and even merely air. It is widely used to suction material with liquid level below the pump, For instance in the milking room, it suctions milk from the milk barrel. It can also be used in automatic CIP cleaning system as return flow pump in cleaning tank. The mechanical sealing is the build-in influx type, and the temperature of suctioned materiaI is no higher than 100 Degree.
pum